91 lines
3.6 KiB
Markdown
91 lines
3.6 KiB
Markdown
---
|
|
title: "Big shiny arcade buttons"
|
|
date: 2019-11-05T08:20:43+01:00
|
|
draft: false
|
|
summary: Adding buttons to my "smart desk"
|
|
images: [/static/img/buttons-anim.gif, /static/img/buttons-aus.jpg, /static/img/buttons-switches-marked.jpg]
|
|
---
|
|
Last [post]({{< ref "/posts/desk-automation.md" >}}) i teased the next upgrade of my smart desk project which are some big arcade buttons to control the light even when my network is down. Well...
|
|
|
|
I finished that part over the last few days:
|
|
|
|
{{< figure src="/img/buttons-aus.jpg">}}
|
|
|
|
The buttons i did choose for the desk are thous big arcade buttons[^1] as they produce this satisfying click when pressed. They come with an integrated LED and resistor, but -as they are not supposed to be driven by a 3.3 volt microcontroller- they need 12 volt supplied to be fully lit up. For the controller i use a normal USB power supply so i tried to power the LEDs with 5 volts. That made them bright enough so i went with that...
|
|
|
|
The button comes in 2 parts which have to be assembled together. The first part is the thing you actually press (which also lets the light pass) and the second part is the Switch+LED combo. To make a neat package i modified the second part. By modified i mean i soldered a transistor to the pins to up the 3.3V logic level from the GPIOs of the controller to 5V needed for the LED. For that i just used a normal 2N2222 NPN-Transistor[^2].
|
|
|
|
Soldered together the switches + transistor + some cables the "thing" looks something like this:
|
|
{{< figure src="/img/buttons-switches-marked.jpg">}}
|
|
|
|
The transistor is marked red, as the photo is to potato-quality to make it out otherwise :D
|
|
|
|
| pin | connected to
|
|
| -----------|------
|
|
| 1 | GPIO (Switch)
|
|
| 2 | 3.3V
|
|
| 3 | 5V
|
|
| 4 | GPIO (LED)
|
|
| 5 | GND
|
|
|
|
after hooking it up the the controller i had to change and add some parts of the configuration yaml of the esphome-firmware:
|
|
```yaml
|
|
light:
|
|
- platform: monochromatic
|
|
name: "Rote Led"
|
|
output: led_rot
|
|
id: rotled
|
|
|
|
output:
|
|
- platform: ledc
|
|
id: led_rot
|
|
pin: 14
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin:
|
|
number: 12
|
|
inverted: True
|
|
mode: INPUT_PULLUP
|
|
name: "ButtonRot"
|
|
filters:
|
|
- delayed_on: 20ms
|
|
on_click:
|
|
min_length: 5ms
|
|
max_length: 500ms
|
|
then:
|
|
- switch.toggle: relay1
|
|
|
|
switch:
|
|
- platform: gpio
|
|
pin:
|
|
number: 33
|
|
inverted: True
|
|
name: "Schreibtischlampe"
|
|
id: relay1
|
|
on_turn_on:
|
|
then:
|
|
- light.turn_on:
|
|
id: rotled
|
|
transition_length: 200ms
|
|
on_turn_off:
|
|
then:
|
|
- light.turn_off:
|
|
id: rotled
|
|
transition_length: 500ms
|
|
```
|
|
|
|
The added parts in the on\_turn\_{on,off} sections of the switch turn the LED {on,off}.
|
|
By hooking them up to the switch activation and not the button press the leds also turn on when the relay gets activated via the webserver.
|
|
The "transition_length: ...ms" parameter makes the LED fade in and out smoothly (only works on an PWM GPIO).
|
|
|
|
After that there only was a case to design and 3D print. I settled for the classic highly complex[^3] box shape design as you can see in the image above.
|
|
|
|
As you can see in the image i have another blue button next the the red one... not realy sure what to do with it right now, if i come up with something i'll probably do another post about it here ;)
|
|
|
|
|
|
{{< figure src="/img/buttons-anim.gif">}}
|
|
|
|
[^1]: You can find them easily when you search ebay or any other site that sells electronics from china
|
|
[^2]: [Sparkfun](https://learn.sparkfun.com/tutorials/transistors/applications-i-switches) describes the basic circuit quite good
|
|
[^3]: "super complex" |